Daniel Smith Iridescent Gold Watercolor Ground allows you to paint watercolors on any surface and gives you a beautiful, iridescent gold surface to paint on!
The ground makes a luminous gold paintable area when applied to a white surface, and because it is semi-transparent, it allows the color and/or pattern of the surface it is applied onto to show slightly through the iridescent gold sheen.
For deepest gold, apply 2 to 3 thin coats of the Iridescent Gold Watercolor Ground. Your transparent and semi-transparent watercolors will add a glaze of color when painted over the Iridescent Gold Ground modifying their color.
You can paint over an entire surface with the ground or only in areas that you wish to add iridescent gold effects, perhaps using the other DANIEL SMITH Watercolor Grounds in the other areas if you are not applying it to watercolor paper.
As with all the Daniel Smith Watercolor Grounds, Iridescent Gold Watercolor Ground provides a surface to paint with your watercolors on most any substrate, and it is mixed media friendly.
The Daniel Smith Iridescent Gold Watercolor Ground has an excellent lightfastness, is archival and gives you more creative ways and surfaces to paint with watercolors!
It works on everything you can think of, from plastic and cloth to tin and stone, giving you an incredible range of new possibilities. But best of all you can rescue a flawed painting plus lift and scrub without damaging the picture's surface.
It creates a soft, absorbent watercolour surface with a slightly cottony texture that's similar to cold press paper and works beautifully with watercolour because it creates a surface that is a bit more absorbent than paper.
1 Pint of Daniel Smith Watercolor Ground will cover 107 square feet at 1mm thickness.
How to use:
Absorbent or semi-absorbent surfaces require no special prep before brushing on DANIEL SMITH Watercolour Ground. These include paper, canvas and other fabrics, wood, plaster, shells and hardboard. Non-absorbent surfaces such as metal, plastic or glass may benefit from being lightly abraded with sandpaper or steel wool before brushing on the Watercolour Ground.
We recommend using Watercolour Ground straight from the container. It has a thick, brushable consistency. Use a soft-haired synthetic brush for a smooth finish or a hog bristle brush for a more textured finish. Since the ground is transparent, one coat will cover most surfaces; very absorbent surfaces such as unfinished soft wood may require two coats, allowing the first coat to cure before adding the second. Wash brushes immediately after use.
Let Watercolour Ground dry and cure for at least 24 hours. This allows it to attain the right degree of absorption
Watercolour Ground works beautifully with watercolours and thinned acrylics. Because it creates a surface more absorbent than paper, you will want to use less water with your paint. Experiment and see what works best for you. It also works beautifully with Daniel Smith Masking Fluid.
Please note: Although this ground allows you to paint with watercolour on any surface, the results will differ from the effects achieved when using paper.
Delivery & support
Orders over £30 benefit from FREE delivery. Most orders delivered to a UK address will arrive within 5-7 working days, however, we acknowledge that delivery times to some outlying areas may occasionally take a little longer.
Need your supplies quickly?
There is an option to select express delivery at the checkout, the cost of which will vary depending on order size. Alternatively, you can contact us on 0800 980 1123 for a postage quote.
See here for information about international postage rates.
- Daniel Smith
- Daniel Smith Watercolour Grounds