The frame clamp has a quick action mechanism to quickly and securely hold the two mitred pieces of moulding. Once clamped, the corner is turned upside down and positioned on the non-slip base and up against the fence for accurate location of the wedge.
The fence itself can be positioned to allow for any sized picture frame moulding, up to 75mm wide, with a front and back locating stop which can be set when using wider mouldings which require two wedges in each corner.When working with taller mouldings, up to 100mm, it is possible to perform an operation known as stacking, where two wedges are inserted on top of each other.
The second wedge pushes the first one in deeper so that inserting 2 x 10mm height wedges is the equivalent of a 20mm wedge.The driver for inserting the wedges has a square shaped magnetic tip which securely holds the next wedge in place until the wedge is fully inserted and flush with the back of the frame. The hand lever does not require much force and can be operated by anybody.
Once all 4 corners have been joined the frame is ready for the artwork to be put in, the backing board secured in place, using our T225 Tab Driver (stock code PFATG), and then hung on the wall.
We include a FREE 266 Piece Hardware Kit to provide the finishing touch:
100 x 7mm Wedges
100 x 10mm Wedges
5m Picture Hanging Wire
8 x Screw Eyes
8 x D Rings
8 x Screw Rings
6 x Large Wall Hook
4 x Small wall hook
10 x Wood screw
20 x Masonry Nail
1 x Frame leveler (Spirit Level)
Delivery & support
Orders over £30 benefit from FREE delivery. Most orders delivered to a UK address will arrive within 5-7 working days, however, we acknowledge that delivery times to some outlying areas may occasionally take a little longer.
Need your supplies quickly?
There is an option to select express delivery at the checkout, the cost of which will vary depending on order size. Alternatively, you can contact us on 0800 980 1123 for a postage quote.
See here for information about international postage rates.
- Framing Accessories